Audio Technica PRO49Q cardioid Microphone 13.0″

USD $ 207.00

Audio Technica PRO49Q cardioid Microphone 13.0″

SKU: ATA_PRO49Q Category:

Description

The PRO 49Q is a wide-range condenser microphone with a cardioid polar pattern. It is designed to provide clear, intelligible sound reproduction in a wide range of settings, such as conferences, courtrooms, houses of worship and other demanding sound pickup applications.
The small-diameter double gooseneck design permits highly flexible positioning while maintaining a smooth, well-contoured appearance. The PRO 49Q stands 332.0 mm (13.07″) from the table or podium. The microphone requires 9V to 52V phantom power for operation.
The microphone’s cardioid polar pattern provides a 120° angle of acceptance. An XLRM-type connector insert at the base allows the microphone to be plugged directly into an XLRF-type panel jack or microphone cable. The microphone comes equipped with a foam windscreen. The microphone is enclosed in a rugged housing with a low-reflectance black finish.

Features
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Quick-mount design with 3-pin XLRM-type connector insert at base
  • Cardioid polar pattern with 120º acceptance angle
  • Self-contained electronics eliminate need for external power modules
  • Flat, smooth frequency response
  • Quiet, fixed-placement, long-life gooseneck
  • Foam windscreen offers resistance to P-pops and other breath blasts
  • Plugs into any standard XLRF-type surface or cable connector
  • Overall length of 13.07″ (332.0 mm)
Specifications
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 70-16,000 Hz
OPEN CIRCUIT SENSITIVITY -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 134 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 106 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 66 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 9-52V DC, 2 mA typical
WEIGHT 2.8 oz (80 g)
DIMENSIONS 13.07″ (332.0 mm) long,
0.47″ (12.0 mm) head diameter,
0.74″ (18.9 mm) base diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORY FURNISHED AT8146 windscreen
AUDIO-TECHNICA CASE STYLE M23